Allegion offers Schlage line of Smart Locks. Mosino Platform offers a complete integration for Schlage locks, including pairing, unlocking as well as Audit Trail.
This article covers the simplest way to program a Schlage fob. Learn more about Allegion Schlage locks here: https://www.allegion.com/corp/en/brands/schlage.html
Pre-requisites
Mosino Staff Hub App
Valid Mosino Manager account for Staff Hub. If you do not have one, please speak with your Mosino representative or the your IT Administrator.
Schlage lock must be in factory mode. Each Schlage lock has different Factory Reset settings. Speak with your Mosino representative or Schlage team to know how to put a lock in Factory Mode if repairing
Programming a fob
Open the Staff Hub portal on your computer or open the Staff Hub mobile app and go to General > Client 360.
Loading the profile of the unit and select "Smart Devices". Once the tab loads, it will list all the current smart devices in the unit.
Press "Add Key Fob" to add a new key fob.
In the panel, fill out all the details, select the customer as well as the doors and access levels you would like to give access to in the fob.
The Badge ID is the number on the physical fob. Ignore any leading "0"s and simply use the remaining number. This number would allow you to track which physical fob is being used.
Note: Access Levels are simply groups that contain various doors to simplify selection.
Once the information is filled out, press "Add" and a screen will appear to start the programming stage. This screen will indicate the status of the programming process.
Note: before starting the next step, please ensure a Schlage encoder MT20 or MT20W is already configured and connected to the internet.
To program, place your physical fob on the Allegion Encoder, generally referred to a "MT20" or "MT20W".
Once the fob is detected by encoder, it will indicate on the screen "Card Found..."
Once the fob is found, the programming will commence and within 10-15 seconds, the fob will be programmed and the screen will a message in Green indicating the process is completed and the fob is ready to be used.
